Custom & Wireless Sales » Suppliers

Industry’s First Battery Operated, Portable 20 GHz Synthesized Signal Generator!

Roger — Mon, 31 May 2010 16:21:07 +0000

10 MHz to 20 GHz Frequency Performance & 4 Hours of Continuous Battery Operation

Chelmsford, MA 04/21/2010 -

Hittite Microwave Corporation, the world class supplier of complete MMIC based solutions for communication & military markets, has launched the HMC-T2100B, the first battery operated, 10 MHz to 20 GHz Portable Synthesized Signal Generator. Designed to fulfill signal generation needs in the field or on the bench, and priced at only $14,998, the HMC-T2100B provides the highest output power, lowest harmonic levels and broadest frequency range compared with portable signal generators of similar size and cost.

For customers who would like a more information or a demonstration of this new synthesizer, please Contact Us Here.

Empower RF Systems selects CWS for Representation…

Roger — Tue, 09 Feb 2010 19:45:25 +0000

Custom & Wireless Sales now can offer a wide range of High Power, Solid-State Amplifiers up to 6 GHz from Empower RF Systems.

Empower is widely known for designing robust modules and systems for the most demanding applications such as used in the Military and Aerospace markets. However, they also leverage their technology in commercial applications such as Wireless Systems and Broadcast. Another area Empower supports power amplification for EMI / RFI Testing.

Please contact us if you would like a catalog or additional information.

New Linear Regulators make for better Phase Noise

Roger — Thu, 14 Jan 2010 00:01:34 +0000

Hittite now offers a very low noise regulator suitable for biasing oscillators and related circuitry where power supply-induced phase noise is of concern. Please click below for more information, or contact us here.

To:
Subject:
Roger Pettengill – CW-Sales Product Announcements from Hittite, January 7, 2010


My Subscription Update your profile: subscribe or unsubscribe For questions or comments: subscribe@hittite.com Submit an Inquiry For Sales, Applications & Literature Inquiries select the link below Submit Inquiry / Feedback Sample Request For a sample request of these new products select the link below Sample Request	Product Announcement from Hittite, January 7, 2010 Low Noise, High PSRR Regulator for Demanding Telematics Applications HMC860LP3E Low Noise Spectral Density: 3nV/?Hz, High Power Supply Rejection Ratio: 80 dB at 1 kHz, Four Regulated Outputs are Adjustable from 2.5V to 5.2V The HMC860LP3E is ideal for conditioning the DC supply for Hittite’s PLLs, VCOs and PLL w/ Integrated VCO products. Hittite Introduces Four New Product Lines! Hittite now offers four new product lines: Power Conditioning, High Speed Comparators, PLLs w/Integrated VCOs and Dielectric Resonator Oscillators (DROs). Hittite offers over 800 RoHS and RoHS-5 compliant products across 24 product lines. Released data sheets for all of Hittite’s latest products can be found by visiting the New Products section of our website. Hittite Microwave Corporation 20 Alpha Road, Chelmsford, MA 01824 U.S.A. Ph: 978-250-3343 Fax: 978-250-3373 www.hittite.com email: sales@hittite.com Hittite Microwave Privacy Policy

Hittite News!

Roger — Wed, 09 Dec 2009 13:15:56 +0000

Please click on the image above for access to data sheets. If you have an application for these types of devices, please call Custom & Wireless Sales at 408-371-0222. Evaluation Boards and Samples are available to qualified customers.

Florida RF Labs provides coaxial cable calculator…

Roger — Mon, 02 Nov 2009 23:15:21 +0000

Florida RF Labs provides an easy online tool to specify coaxial cable assemblies up to 40 GHz.

This interactive tool allows Engineers to first select cable type according to their Frequency Band and L0ss / Ft. requirements. One can then select connector types, cable presferences etc. to zero in requirements.

Florida RF Labs can build Semi-Rigid, Conformable and Flexible Cable assemblies to meet demanding test applications.

EMC on-line Temperature Variable Attenuator tool…

Roger — Mon, 02 Nov 2009 18:17:35 +0000

EMC Technology provides an online tool for the optimum selection of its temperature variable attenuators (TVAs).

Engineers now have an easy way to enter their circuit losses (or gains) over temperature and by making TVA selections they can immediately see the resulting combined frequency response. Once a candidate TVA has been identified, samples and quotes can be requested.

EMC Technology has a wide range of resistive products available, such as TVA’s, Chip Attenuators, & Terminations.

Free ComNav Engineering “Dionysus” Filter Design Software

Roger — Mon, 02 Nov 2009 17:52:04 +0000

ComNav Engineering has some neat software for Engineers that need to specify or design filters. And the best part is that it’s FREE.

Download it here.

Designs include:
Lowpass Filters, Highpass Filters, Bandpass Filters, Notch Filters, Diplexers, Multiplexers, Delay Equalizers, Amplitude Equalizers, Attenuators, Coax Resonators, Puck Resonators, Microstrip, Stripline, Round and Square Rod Coupled and Transmission Lines.

Many Analysis options are available, including:
S Parameter, Return Loss, Attenuation, Phase Linearity, Delay, Smith Chart.

Write Industry Standard *.S2P files for further simulation.
Fourier Pulse: Define Pulse Train, Set Noise Level, View Pulse Distortion, Power, Rotate source and load impedances, Set Impedance Mismatch, Identify max Voltage, Current, and Power dissipation etc.

Hittite releases line of Integrated VCO’s & PLL ICs…

Roger — Fri, 16 Oct 2009 00:02:05 +0000

PLL with Integrated VCO Product Line Enables Miniature LO Solutions

Industry’s First Fractional-N Synthesizers with Integrated Microwave VCOs to 13.4 GHz!

Chelmsford, Ma 10/14/2009 -

Hittite Microwave Corporation, the world class supplier of complete MMIC based solutions for communication & military markets, has introduced a new line of SMT packaged PLLs with Integrated Voltage Controlled Oscillators (VCOs) which are ideal for microwave radio, military, industrial sensors and test and measurement applications from 7.3 GHz to 13.4 GHz.

The HMC764LP6CE, HMC765LP6CE, HMC783LP6CE and HMC807LP6CE are SiGe BiCMOS PLL with Integrated VCO RFICs which provide output frequency coverage of 7.3 to 8.2 GHz, 7.8 to 8.8 GHz, 11.5 to 12.5 GHz, and 12.4 to 13.4 GHz respectively.

Each of these new products include an advanced fractional-N synthesizer and an ultra low noise VCO in a 6×6 mm QFN plastic package, while requiring a minimal number of external components. The PLL/synthesizer section also incorporates a Cycle Slip Prevention (CSP) mode, which essentially holds the PFD gain at maximum until the frequency difference is near zero, reducing the time to arrive at the new frequency by 50%. A high frequency reference path allows the use of references up to 220 MHz, while source buffers in the reference path support both square wave and 50 Ohm sinusoidal reference oscillators. Ultra low in-close phase noise and low spurious also permit architectures with wider loop bandwidths for faster frequency hopping and low microphonics. Spurious outputs are low enough to eliminate the need for costly Direct Digital Synthesis (DDS) references in many applications.

The HMC764LP6CE, HMC765LP6CE, HMC783LP6CE and HMC807LP6CE PLLs with Integrated VCOs operate in fractional or integer mode, providing the ability to develop high performance phase locked loops for point-to-point radio, military and sensor applications in the microwave domain. Primarily designed for ultra low phase noise applications, the internal architecture includes a 16-bit RF N-Divider, a 24-bit delta-sigma modulator, a very low noise digital phase frequency detector (PFD), and a precision controlled charge pump.

These new products offer the same exceptional microwave VCO performance which Hittite is recognized for, with the added functionality of an advanced, integrated fractional-n synthesizer. For example, the HMC764LP6CE exhibits consistent tuning sensitivity and high output power of up to +16 dBm across its bandwidth, making it ideal for driving the LO port of many of Hittite’s high linearity, double balanced and I/Q mixer and receiver products. Developing a high performance programmable local oscillator can still require considerable design time and potentially several design iterations. For these reasons, Hittite has developed the PLL with Integrated VCO Designer’s Kit which enables immediate measurement of the LO design to minimize design time, and facilitate rapid prototyping.

Hittite’s new line of PLL with Integrated VCO products uniquely combine the attributes of low phase noise, wide frequency coverage, advanced features and ultra small size, making them ideal for numerous small form factor applications.

Samples and evaluation PC boards for all SMT packaged products are available from stock and can be ordered via the company’s e-commerce site or via direct purchase order.

Hittite Microwave Corporation is an innovative designer and manufacturer of analog and mixed-signal ICs, modules, subsystems and instrumentation for digital, RF, microwave and millimeterwave applications covering DC to 110 GHz. Our RFIC/MMIC products are developed using state-of-the-art GaAs, GaN, InGaP/GaAs, InP, SOI, SiGe, CMOS and BiCMOS semiconductor processes utilizing MESFET, HEMT, pHEMT, mHEMT, HBT and PIN devices. Our custom and standard products support a wide range of wireless / wired communications and radar applications for Automotive, Broadband, Cellular/4G, Fiber Optics, Microwave & Millimeterwave Communications, Military, Test & Measurement, and Space markets.

PR Contact: Beth McGreevy, MarCom Manager mcgreevy@hittite.com

ANADIGICS Selects Custom & Wireless Sales…

Roger — Mon, 28 Sep 2009 18:07:48 +0000

We are pleased to announce that ANADIGICS (Warren, NJ) has selected us to represent their products in Northern California & Northern Nevada. The company has a wide selection of RFIC’s up to 6 GHz. Power Amplifiers targeted for standard applications for handheld, base station and infrastructure products.

We will be highlighting many new product introductions as they occur. For example, Anadigics has released the AWL9966 Front End Integrated Circuit for 802.11 a/b/g/n & Bluetooth applications.

Please contact us if you require catalogs or further information.

Jennic releases new ZigBee Pro solutions….

Roger — Mon, 31 Aug 2009 23:34:17 +0000

JN5148 Wireless Microcontroller – ZigBee PRO Platform

The JN5148 launches Jennic’s latest generation of ultra low power, low cost wireless microcontrollers for wireless sensor networking applications based on the IEEE802.15.4 standard, including ZigBee PRO.

It offers an enhanced 32-bit RISC processor featuring improved coding efficiency and up to 32MIPs performance, a fully compliant 2.4GHz IEEE802.15.4 transceiver, 128kB of ROM and 128kB of RAM to support both the networking protocol stack and user application on-chip, and a rich mix of user peripherals.

The 32-bit RISC CPU achieves world class performance through its variable instruction width, multi-stage instruction pipeline and prioritised interrupt scheduler.

The highest levels of on-chip integration also means that the device offers many new and innovative peripheral enhancements, such as:

4-wire digital audio interface that will connect directly to mainstream audio CODECs
Low power sleep counters designed for pulse counting in AMR applications
Time of Flight (TOF) ranging engine (with patent pending) for use in location aware systems based on IEEE802.15.4

The JN5148 sets new benchmarks for the lowest power consumption, highest processing capability and the highest levels of integration in a single chip wireless microcontroller.

Ultra Low Power Consumption

The integrated power management on the JN5148 efficiently controls the system power, enabling it to support applications that require the use of a coin cell with a 20mA limited discharge capability. With a system operating current consumption of 18mA when receiving, and 15mA when transmitting at +3dBm, the JN5148 consumes typically 35% less power than existing solutions in these modes of operation.

ZigBee PRO Ready

The JN5148 is Jennic’s ZigBee PRO platform. The combination of 128kB ROM, 128kB RAM and the 32-bit RISC CPU ensure that it is able to cover the complete spectrum of ZigBee PRO applications, with stack and application integrated in a single chip solution. Furthermore, with support for co-processor configurations it enables the addition of ZigBee PRO functionality to existing applications processors with complete ease and speed of implementation.

Together, the combination of Jennic’s JN5148 wireless microcontroller with Jennic’s ZigBee PRO networking stack have been certified as a ZigBee Compliant Platform (ZCP).

Custom & Wireless Sales » Suppliers

Industry’s First Battery Operated, Portable 20 GHz Synthesized Signal Generator!

Empower RF Systems selects CWS for Representation…

New Linear Regulators make for better Phase Noise

My Subscription

Submit an Inquiry

Sample Request

Product Announcement from Hittite, January 7, 2010

Low Noise, High PSRR Regulator for Demanding Telematics Applications

Hittite Introduces Four New Product Lines!

Hittite now offers four new product lines: Power Conditioning, High Speed Comparators, PLLs w/Integrated VCOs and Dielectric Resonator Oscillators (DROs).

Hittite offers over 800 RoHS and RoHS-5 compliant products across 24 product lines. Released data sheets for all of Hittite’s latest products can be found by visiting the New Products section of our website.